• Annual Energy Production
    (10 MWh)

  • Annual Gas Consumption
    (10KNM³)

  • Annual utilization hours
    (h)

  • Reduce the carbon dioxide emmission
    (Ton /year)

  • Annual Expense Save
    (10K RMB)

  • over %

    System energy efficiency
    (%)

  • Air Bearing
  • Combustion Chamber
  • Coupling
  • High speed Generator
  • heat exchanger
Micro Gas Turbine

Micro Gas Turbine

A gas turbine is a combustion engine that can convert natural gas or other liquid fuels to mechanical energy. This energy then drives a generator that produces electrical energy.

VIEW MORE

Distributed energy solution for industries & parks

了解更多解决方案 +

Distributed energy solution for commercial & public buildings

Utilization of medium and low heat value gases

TECHNICAL ADVANTAGES

VIEW MORE
  • High-efficiency centrifugal compressor technology
  • Centrifugal compressor flow rate between 1 kg/s to 12 kg/s. Pressure ratio between 4.0 to 8.6.
  • — VIEW MORE
  • High-efficiency axial turbine technology
  • Axial turbine flow rate between 1 kg/s to 12 kg/s. Expansion ratio between 3.3 to 7.7.
  • — VIEW MORE
  • High-efficiency low-emission combustion technology
  • The emission of oxynitrides (NO and NO2) is controlled below 15 ppm (equivalent to 15% O2); carbon monoxide (CO) is below 50 ppm (equivalent to 15% O2), and Unburned Hydrocarbons (UHC) is below 20 ppm (equivalent to 15% O2). Combustion efficiency is about 99.9%. Moreover, advanced low-swirl combust
  • — VIEW MORE
  • Air bearing technology
  • Both radial and thrust air bearings have passed the limiting speed test, maximum load test and low cycle fatigue life test under normal temperature. The radial air bearing achieved maximum test speed of 70,000 rpm, maximum load of 1,000 N, and start-stop times of 5,000. The radial air bearings can s
  • — VIEW MORE
  • High-speed motor technology
  • High-speed rare-earth permanent magnet motors are characterized by no excitation, simple structure, high magnetic energy density, and high efficiency, etc. 51,000 rpm/160 kW and 64,000 rpm/140 kW motors have been successfully applied to power generation of micro gas turbines, filling the domestic ga
  • — VIEW MORE
About ENN Power

ENN Power is a global leading supplier of micro and small gas turbines, providing core power for distributed energy systems.

  •  +

    400
    Employee

  • +(ton/year)

    Reduce carbon emissions

  • i
    above+(hours)

    operation hours